acme.sh/deploy/README.md

9.0 KiB

Using deploy api

Before you can deploy your cert, you must issue the cert first.

Here are the scripts to deploy the certs/key to the server/services.

1. Deploy the certs to your cpanel host

If you want to deploy using cpanel UAPI see 7.

(cpanel deploy hook is not finished yet, this is just an example.)

Then you can deploy now:

export DEPLOY_CPANEL_USER=myusername
export DEPLOY_CPANEL_PASSWORD=PASSWORD
acme.sh --deploy -d example.com --deploy-hook cpanel

2. Deploy ssl cert on kong proxy engine based on api

Before you can deploy your cert, you must issue the cert first. Currently supports Kong-v0.10.x.

acme.sh --deploy -d ftp.example.com --deploy-hook kong

3. Deploy the cert to remote server through SSH access

The ssh deploy plugin allows you to deploy certificates to a remote host using SSH command to connect to the remote server. The ssh plugin is invoked with the following command...

acme.sh --deploy -d example.com --deploy-hook ssh

Prior to running this for the first time you must tell the plugin where and how to deploy the certificates. This is done by exporting the following environment variables. This is not required for subsequent runs as the values are stored by acme.sh in the domain configuration files.

Required...

export DEPLOY_SSH_USER=username

Optional...

export DEPLOY_SSH_CMD=custom ssh command
export DEPLOY_SSH_SERVER=url or ip address of remote host
export DEPLOY_SSH_KEYFILE=filename for private key
export DEPLOY_SSH_CERTFILE=filename for certificate file
export DEPLOY_SSH_CAFILE=filename for intermediate CA file
export DEPLOY_SSH_FULLCHAIN=filename for fullchain file
export DEPLOY_SSH_REMOTE_CMD=command to execute on remote host
export DEPLOY_SSH_BACKUP=yes or no

DEPLOY_SSH_USER Username at the remote host that SSH will login with. Note that SSH must be able to login to remote host without a password... SSH Keys must have been exchanged with the remote host. Validate and test that you can login to USER@URL from the host running acme.sh before using this script.

The USER@URL at the remote server must also have has permissions to write to the target location of the certificate files and to execute any commands (e.g. to stop/start services).

DEPLOY_SSH_CMD You can customize the ssh command used to connect to the remote host. For example if you need to connect to a specific port at the remote server you can set this to, for example, "ssh -p 22" or to use sshpass to provide password inline instead of exchanging ssh keys (this is not recommended, using keys is more secure).

DEPLOY_SSH_SERVER URL or IP Address of the remote server. If not provided then the domain name provided on the acme.sh --deploy command line is used.

DEPLOY_SSH_KEYFILE Target filename for the private key issued by LetsEncrypt.

DEPLOY_SSH_CERTFILE Target filename for the certificate issued by LetsEncrypt. If this is the same as the previous filename (for keyfile) then it is appended to the same file.

DEPLOY_SSH_CAFILE Target filename for the CA intermediate certificate issued by LetsEncrypt. If this is the same as a previous filename (for keyfile or certfile) then it is appended to the same file.

DEPLOY_SSH_FULLCHAIN Target filename for the fullchain certificate issued by LetsEncrypt. If this is the same as a previous filename (for keyfile, certfile or cafile) then it is appended to the same file.

DEPLOY_SSH_REMOTE_CMD Command to execute on the remote server after copying any certificates. This could be any additional command required for example to stop and restart the service.

DEPLOY_SSH_BACKUP Before writing a certificate file to the remote server the existing certificate will be copied to a backup directory on the remote server. These are placed in a hidden directory in the home directory of the SSH user

~/.acme_ssh_deploy/[domain name]-backup-[timestamp]

Any backups older than 180 days will be deleted when new certificates are deployed. This defaults to "yes" set to "no" to disable backup.

###Examples using SSH deploy The following example illustrates deploying certificates to a QNAP NAS (tested with QTS version 4.2.3)

export DEPLOY_SSH_USER="admin"
export DEPLOY_SSH_KEYFILE="/etc/stunnel/stunnel.pem"
export DEPLOY_SSH_CERTFILE="/etc/stunnel/stunnel.pem"
export DEPLOY_SSH_CAFILE="/etc/stunnel/uca.pem"
export DEPLOY_SSH_REMOTE_CMD="/etc/init.d/stunnel.sh restart"

acme.sh --deploy -d qnap.example.com --deploy-hook ssh

Note how in this example both the private key and certificate point to the same file. This will result in the certificate being appended to the same file as the private key... a common requirement of several services.

The next example illustrates deploying certificates to a Unifi Controller (tested with version 5.4.11).

export DEPLOY_SSH_USER="root"
export DEPLOY_SSH_KEYFILE="/var/lib/unifi/unifi.example.com.key"
export DEPLOY_SSH_FULLCHAIN="/var/lib/unifi/unifi.example.com.cer"
export DEPLOY_SSH_REMOTE_CMD="openssl pkcs12 -export \
   -inkey /var/lib/unifi/unifi.example.com.key \
   -in /var/lib/unifi/unifi.example.com.cer \
   -out /var/lib/unifi/unifi.example.com.p12 \
   -name ubnt -password pass:temppass \
 && keytool -importkeystore -deststorepass aircontrolenterprise \
   -destkeypass aircontrolenterprise \
   -destkeystore /var/lib/unifi/keystore \
   -srckeystore /var/lib/unifi/unifi.example.com.p12 \
   -srcstoretype PKCS12 -srcstorepass temppass -alias ubnt -noprompt \
 && service unifi restart"

acme.sh --deploy -d unifi.example.com --deploy-hook ssh

In this example we execute several commands on the remote host after the certificate files have been copied... to generate a pkcs12 file compatible with Unifi, to import it into the Unifi keystore and then finally to restart the service.

Note also that once the certificate is imported into the keystore the individual certificate files are no longer required. We could if we desired delete those files immediately. If we do that then we should disable backup at the remote host (as there are no files to backup -- they were erased during deployment). For example...

export DEPLOY_SSH_BACKUP=no
# modify the end of the remote command...
&& rm /var/lib/unifi/unifi.example.com.key \
      /var/lib/unifi/unifi.example.com.cer \
      /var/lib/unifi/unifi.example.com.p12 \
&& service unifi restart

4. Deploy the cert to local vsftpd server

acme.sh --deploy -d ftp.example.com --deploy-hook vsftpd

The default vsftpd conf file is /etc/vsftpd.conf, if your vsftpd conf is not in the default location, you can specify one:

export DEPLOY_VSFTPD_CONF="/etc/vsftpd.conf"

acme.sh --deploy -d ftp.example.com --deploy-hook vsftpd

The default command to restart vsftpd server is service vsftpd restart, if it doesn't work, you can specify one:

export DEPLOY_VSFTPD_RELOAD="/etc/init.d/vsftpd restart"

acme.sh --deploy -d ftp.example.com --deploy-hook vsftpd

5. Deploy the cert to local exim4 server

acme.sh --deploy -d ftp.example.com --deploy-hook exim4

The default exim4 conf file is /etc/exim/exim.conf, if your exim4 conf is not in the default location, you can specify one:

export DEPLOY_EXIM4_CONF="/etc/exim4/exim4.conf.template"

acme.sh --deploy -d ftp.example.com --deploy-hook exim4

The default command to restart exim4 server is service exim4 restart, if it doesn't work, you can specify one:

export DEPLOY_EXIM4_RELOAD="/etc/init.d/exim4 restart"

acme.sh --deploy -d ftp.example.com --deploy-hook exim4

6. Deploy the cert to OSX Keychain

acme.sh --deploy -d ftp.example.com --deploy-hook keychain

7. Deploy to cpanel host using UAPI

This hook is using UAPI and works in cPanel & WHM version 56 or newer.

acme.sh  --deploy  -d example.com  --deploy-hook cpanel_uapi

DEPLOY_CPANEL_USER is required only if you run the script as root and it should contain cpanel username.

export DEPLOY_CPANEL_USER=username
acme.sh  --deploy  -d example.com  --deploy-hook cpanel_uapi

Please note, that the cpanel_uapi hook will deploy only the first domain when your certificate will automatically renew. Therefore you should issue a separate certificate for each domain.

8. Deploy the cert to your FRITZ!Box router

You must specify the credentials that have administrative privileges on the FRITZ!Box in order to deploy the certificate, plus the URL of your FRITZ!Box, through the following environment variables:

$ export DEPLOY_FRITZBOX_USERNAME=my_username
$ export DEPLOY_FRITZBOX_PASSWORD=the_password
$ export DEPLOY_FRITZBOX_URL=https://fritzbox.example.com

After the first deployment, these values will be stored in your $HOME/.acme.sh/account.conf. You may now deploy the certificate like this:

acme.sh --deploy -d fritzbox.example.com --deploy-hook fritzbox

9. Deploy the cert to strongswan

acme.sh --deploy -d ftp.example.com --deploy-hook strongswan