acme.sh/deploy/lighttpd.sh
Glenn Strauss 8419b42e83 use ${ACME_OPENSSL_BIN:-openssl} instead of openssl
(requested by @Neilpang in #3687)
2021-09-30 19:00:39 -04:00

281 lines
9.9 KiB
Bash

#!/usr/bin/env sh
# Script for acme.sh to deploy certificates to lighttpd
#
# The following variables can be exported:
#
# export DEPLOY_LIGHTTPD_PEM_NAME="${domain}.pem"
#
# Defines the name of the PEM file.
# Defaults to "<domain>.pem"
#
# export DEPLOY_LIGHTTPD_PEM_PATH="/etc/lighttpd"
#
# Defines location of PEM file for Lighttpd.
# Defaults to /etc/lighttpd
#
# export DEPLOY_LIGHTTPD_RELOAD="systemctl reload lighttpd"
#
# OPTIONAL: Reload command used post deploy
# This defaults to be a no-op (ie "true").
# It is strongly recommended to set this something that makes sense
# for your distro.
#
# export DEPLOY_LIGHTTPD_ISSUER="yes"
#
# OPTIONAL: Places CA file as "${DEPLOY_LIGHTTPD_PEM}.issuer"
# Note: Required for OCSP stapling to work
#
# export DEPLOY_LIGHTTPD_BUNDLE="no"
#
# OPTIONAL: Deploy this certificate as part of a multi-cert bundle
# This adds a suffix to the certificate based on the certificate type
# eg RSA certificates will have .rsa as a suffix to the file name
# Lighttpd will load all certificates and provide one or the other
# depending on client capabilities
# Note: This functionality requires Lighttpd was compiled against
# a version of OpenSSL that supports this.
#
######## Public functions #####################
#domain keyfile certfile cafile fullchain
lighttpd_deploy() {
_cdomain="$1"
_ckey="$2"
_ccert="$3"
_cca="$4"
_cfullchain="$5"
# Some defaults
DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT="/etc/lighttpd"
DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT="${_cdomain}.pem"
DEPLOY_LIGHTTPD_BUNDLE_DEFAULT="no"
DEPLOY_LIGHTTPD_ISSUER_DEFAULT="yes"
DEPLOY_LIGHTTPD_RELOAD_DEFAULT="true"
_debug _cdomain "${_cdomain}"
_debug _ckey "${_ckey}"
_debug _ccert "${_ccert}"
_debug _cca "${_cca}"
_debug _cfullchain "${_cfullchain}"
# PEM_PATH is optional. If not provided then assume "${DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT}"
_getdeployconf DEPLOY_LIGHTTPD_PEM_PATH
_debug2 DEPLOY_LIGHTTPD_PEM_PATH "${DEPLOY_LIGHTTPD_PEM_PATH}"
if [ -n "${DEPLOY_LIGHTTPD_PEM_PATH}" ]; then
Le_Deploy_lighttpd_pem_path="${DEPLOY_LIGHTTPD_PEM_PATH}"
_savedomainconf Le_Deploy_lighttpd_pem_path "${Le_Deploy_lighttpd_pem_path}"
elif [ -z "${Le_Deploy_lighttpd_pem_path}" ]; then
Le_Deploy_lighttpd_pem_path="${DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT}"
fi
# Ensure PEM_PATH exists
if [ -d "${Le_Deploy_lighttpd_pem_path}" ]; then
_debug "PEM_PATH ${Le_Deploy_lighttpd_pem_path} exists"
else
_err "PEM_PATH ${Le_Deploy_lighttpd_pem_path} does not exist"
return 1
fi
# PEM_NAME is optional. If not provided then assume "${DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT}"
_getdeployconf DEPLOY_LIGHTTPD_PEM_NAME
_debug2 DEPLOY_LIGHTTPD_PEM_NAME "${DEPLOY_LIGHTTPD_PEM_NAME}"
if [ -n "${DEPLOY_LIGHTTPD_PEM_NAME}" ]; then
Le_Deploy_lighttpd_pem_name="${DEPLOY_LIGHTTPD_PEM_NAME}"
_savedomainconf Le_Deploy_lighttpd_pem_name "${Le_Deploy_lighttpd_pem_name}"
elif [ -z "${Le_Deploy_lighttpd_pem_name}" ]; then
Le_Deploy_lighttpd_pem_name="${DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT}"
fi
# BUNDLE is optional. If not provided then assume "${DEPLOY_LIGHTTPD_BUNDLE_DEFAULT}"
_getdeployconf DEPLOY_LIGHTTPD_BUNDLE
_debug2 DEPLOY_LIGHTTPD_BUNDLE "${DEPLOY_LIGHTTPD_BUNDLE}"
if [ -n "${DEPLOY_LIGHTTPD_BUNDLE}" ]; then
Le_Deploy_lighttpd_bundle="${DEPLOY_LIGHTTPD_BUNDLE}"
_savedomainconf Le_Deploy_lighttpd_bundle "${Le_Deploy_lighttpd_bundle}"
elif [ -z "${Le_Deploy_lighttpd_bundle}" ]; then
Le_Deploy_lighttpd_bundle="${DEPLOY_LIGHTTPD_BUNDLE_DEFAULT}"
fi
# ISSUER is optional. If not provided then assume "${DEPLOY_LIGHTTPD_ISSUER_DEFAULT}"
_getdeployconf DEPLOY_LIGHTTPD_ISSUER
_debug2 DEPLOY_LIGHTTPD_ISSUER "${DEPLOY_LIGHTTPD_ISSUER}"
if [ -n "${DEPLOY_LIGHTTPD_ISSUER}" ]; then
Le_Deploy_lighttpd_issuer="${DEPLOY_LIGHTTPD_ISSUER}"
_savedomainconf Le_Deploy_lighttpd_issuer "${Le_Deploy_lighttpd_issuer}"
elif [ -z "${Le_Deploy_lighttpd_issuer}" ]; then
Le_Deploy_lighttpd_issuer="${DEPLOY_LIGHTTPD_ISSUER_DEFAULT}"
fi
# RELOAD is optional. If not provided then assume "${DEPLOY_LIGHTTPD_RELOAD_DEFAULT}"
_getdeployconf DEPLOY_LIGHTTPD_RELOAD
_debug2 DEPLOY_LIGHTTPD_RELOAD "${DEPLOY_LIGHTTPD_RELOAD}"
if [ -n "${DEPLOY_LIGHTTPD_RELOAD}" ]; then
Le_Deploy_lighttpd_reload="${DEPLOY_LIGHTTPD_RELOAD}"
_savedomainconf Le_Deploy_lighttpd_reload "${Le_Deploy_lighttpd_reload}"
elif [ -z "${Le_Deploy_lighttpd_reload}" ]; then
Le_Deploy_lighttpd_reload="${DEPLOY_LIGHTTPD_RELOAD_DEFAULT}"
fi
# Set the suffix depending if we are creating a bundle or not
if [ "${Le_Deploy_lighttpd_bundle}" = "yes" ]; then
_info "Bundle creation requested"
# Initialise $Le_Keylength if its not already set
if [ -z "${Le_Keylength}" ]; then
Le_Keylength=""
fi
if _isEccKey "${Le_Keylength}"; then
_info "ECC key type detected"
_suffix=".ecdsa"
else
_info "RSA key type detected"
_suffix=".rsa"
fi
else
_suffix=""
fi
_debug _suffix "${_suffix}"
# Set variables for later
_pem="${Le_Deploy_lighttpd_pem_path}/${Le_Deploy_lighttpd_pem_name}${_suffix}"
_issuer="${_pem}.issuer"
_ocsp="${_pem}.ocsp"
_reload="${Le_Deploy_lighttpd_reload}"
_info "Deploying PEM file"
# Create a temporary PEM file
_temppem="$(_mktemp)"
_debug _temppem "${_temppem}"
cat "${_ckey}" "${_ccert}" "${_cca}" >"${_temppem}"
_ret="$?"
# Check that we could create the temporary file
if [ "${_ret}" != "0" ]; then
_err "Error code ${_ret} returned during PEM file creation"
[ -f "${_temppem}" ] && rm -f "${_temppem}"
return ${_ret}
fi
# Move PEM file into place
_info "Moving new certificate into place"
_debug _pem "${_pem}"
cat "${_temppem}" >"${_pem}"
_ret=$?
# Clean up temp file
[ -f "${_temppem}" ] && rm -f "${_temppem}"
# Deal with any failure of moving PEM file into place
if [ "${_ret}" != "0" ]; then
_err "Error code ${_ret} returned while moving new certificate into place"
return ${_ret}
fi
# Update .issuer file if requested
if [ "${Le_Deploy_lighttpd_issuer}" = "yes" ]; then
_info "Updating .issuer file"
_debug _issuer "${_issuer}"
cat "${_cca}" >"${_issuer}"
_ret="$?"
if [ "${_ret}" != "0" ]; then
_err "Error code ${_ret} returned while copying issuer/CA certificate into place"
return ${_ret}
fi
else
[ -f "${_issuer}" ] && _err "Issuer file update not requested but .issuer file exists"
fi
# Update .ocsp file if certificate was requested with --ocsp/--ocsp-must-staple option
if [ -z "${Le_OCSP_Staple}" ]; then
Le_OCSP_Staple="0"
fi
if [ "${Le_OCSP_Staple}" = "1" ]; then
_info "Updating OCSP stapling info"
_debug _ocsp "${_ocsp}"
_info "Extracting OCSP URL"
_ocsp_url=$(${ACME_OPENSSL_BIN:-openssl} x509 -noout -ocsp_uri -in "${_pem}")
_debug _ocsp_url "${_ocsp_url}"
# Only process OCSP if URL was present
if [ "${_ocsp_url}" != "" ]; then
# Extract the hostname from the OCSP URL
_info "Extracting OCSP URL"
_ocsp_host=$(echo "${_ocsp_url}" | cut -d/ -f3)
_debug _ocsp_host "${_ocsp_host}"
# Only process the certificate if we have a .issuer file
if [ -r "${_issuer}" ]; then
# Check if issuer cert is also a root CA cert
_subjectdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
_debug _subjectdn "${_subjectdn}"
_issuerdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10)
_debug _issuerdn "${_issuerdn}"
_info "Requesting OCSP response"
# If the issuer is a CA cert then our command line has "-CAfile" added
if [ "${_subjectdn}" = "${_issuerdn}" ]; then
_cafile_argument="-CAfile \"${_issuer}\""
else
_cafile_argument=""
fi
_debug _cafile_argument "${_cafile_argument}"
# if OpenSSL/LibreSSL is v1.1 or above, the format for the -header option has changed
_openssl_version=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f2)
_debug _openssl_version "${_openssl_version}"
_openssl_major=$(echo "${_openssl_version}" | cut -d '.' -f1)
_openssl_minor=$(echo "${_openssl_version}" | cut -d '.' -f2)
if [ "${_openssl_major}" -eq "1" ] && [ "${_openssl_minor}" -ge "1" ] || [ "${_openssl_major}" -ge "2" ]; then
_header_sep="="
else
_header_sep=" "
fi
# Request the OCSP response from the issuer and store it
_openssl_ocsp_cmd="${ACME_OPENSSL_BIN:-openssl} ocsp \
-issuer \"${_issuer}\" \
-cert \"${_pem}\" \
-url \"${_ocsp_url}\" \
-header Host${_header_sep}\"${_ocsp_host}\" \
-respout \"${_ocsp}\" \
-verify_other \"${_issuer}\" \
${_cafile_argument} \
| grep -q \"${_pem}: good\""
_debug _openssl_ocsp_cmd "${_openssl_ocsp_cmd}"
eval "${_openssl_ocsp_cmd}"
_ret=$?
else
# Non fatal: No issuer file was present so no OCSP stapling file created
_err "OCSP stapling in use but no .issuer file was present"
fi
else
# Non fatal: No OCSP url was found int the certificate
_err "OCSP update requested but no OCSP URL was found in certificate"
fi
# Non fatal: Check return code of openssl command
if [ "${_ret}" != "0" ]; then
_err "Updating OCSP stapling failed with return code ${_ret}"
fi
else
# An OCSP file was already present but certificate did not have OCSP extension
if [ -f "${_ocsp}" ]; then
_err "OCSP was not requested but .ocsp file exists."
# Could remove the file at this step, although Lighttpd just ignores it in this case
# rm -f "${_ocsp}" || _err "Problem removing stale .ocsp file"
fi
fi
# Reload Lighttpd
_debug _reload "${_reload}"
eval "${_reload}"
_ret=$?
if [ "${_ret}" != "0" ]; then
_err "Error code ${_ret} during reload"
return ${_ret}
else
_info "Reload successful"
fi
return 0
}